(Syllabus) AIPMT 2008 : Revised Chemistry Syllabus
Disclaimer: This website is NOT associated with CBSE, for official website of CBSE visit - www.cbse.gov.in
Revised Chemistry
Syllabus
For AIPMT 2008 Examination
CHEMISTRY
1. Some basic concepts in Chemistry
Importance of Chemistry, physical quantities and their measurement in
Chemistry, SI Units, uncertainty in measurements and use of significant
figures, Unit and dimensional analysis, Matter and its nature, laws of
chemical combinations, atomic, and molecular, masses mole concept, molar
masses, percentage composition and molecular formula, chemical stoichiometry.
2. States of matter
Three states of matter, gaseous state, gas laws (Boyle’s Law and
Charles Law), Avogadro’s Law, Grahams’Law of diffusion, Dalton’s law of
partial pressure, ideal gas equation, Kinetic theory of gases, real gases and
deviation from ideal behaviour, van der Waals’ equation, liquefaction of
gases and critical points, Intermolecular forces; liquids and solids.
3. Atomic structure
Earlier atomic models (Thomson’s and Rutherford) , emission spectrum
of hydrogen atom, Bohr’s model, of hydrogen atom, Limitations of Bohr’s
model, dual nature of matter and radiation, Heisenberg uncertainty principle,
quantum mechanical model of atom (quantum designation of atomic orbitals and
electron energy in terms of principal, angular momentum and magnetic quantum
numbers), electronic spin and spin quantum numbers, Pauli’s exclusion
principle, general idea of screening (constants) of outer electrons by inner
electrons in an atom, Aufbau principle, Hund’s rule, atomic orbitals and
their pictorial representation, electronic configurations of elements.
4. Classification of elements and periodicity in
properties
Need and genesis of classification of elements (from Doebereiner to
Mendeleev), Modern periodic law and present form of periodic table,
Nomenclature of elements with atomic number > 100, electronic
configurations of elements and periodic table, electronic configuration and
types of elements and s, p, d and f blocks, periodic trends in properties of
elements (atomic size, ionization enthalpy, electron gain enthalpy, valence/
oxidation states and chemical reactivity).
5. Chemical energetics
Some basic concepts in thermodynamics, first law of thermodynamics,
heat capacity, measurement of DU and DH, calorimetry, standard enthalpy
changes, thermochemical equations, enthalpy changes during phase
transformations, Hess’s Law, standard enthalpies of formation, bond
enthalpies and calculations based on them.
6. Chemical bonding
Kossel -Lewis approach to chemical bond formation, ionic bonds,
covalent bonds, polarity of bonds and concept of electronegativity, valence
shell electron pair repulsion (VSEPR) theory , shapes of simple molecules,
valence bond theory, hybridization involving s, p and d orbitals and shapes of
molecules s and p bonds; Molecular orbital theory involving homounclear
diatomic molecules; Hydrogen-bonding.
7. Equilibrium
Equilibrium in physical and chemical processes
Equilibrium in physical and chemical processes, dynamic equilibrium, law of
chemical equilibrium and equilibrium constant, homogeneous equilibrium,
heterogenous equilibrium, application of equilibrium constants, Relationship
between reaction quotient Q, equilibrium constant, K and Gibbs’ energy G;
factors affecting equilibrium-Le Chateliar’s principle.
Ionic equilibrium
Acids, Bases and Salts and their ionization, weak and strong electrolytes
degree of ionization and ionization constants, concept of pH, ionic product of
water, buffer solution, common ion effect, solubility of sparingly soluble
salts and solubility products.
8. Redox reactions
Electronic concepts of reduction - oxidation, redox reactions,
oxidation number, balancing of redox reactions.
9. Solid state Chemistry
Classification of solids based on different binding forces: molecular,
ionic, covalent and metallic solids, amorphous and crystalline solids; unit
cells in two dimensional and three dimensional lattices, calculation of
density of a unit cell, packing in solids, voids, number of atoms per unit
cell in a cubic unit cell, point defects, electrical and magnetic properties.
10. Chemical thermodynamics
Spontaneous processes, energy and spontaneity , entropy and second law
of thermodynamics, concept of absolute entropy, Gibbs energy and spontaneity,
Gibbs energy change and equilibrium constant.
11. Solutions
Types of solutions, different units for expressing concentration of
solution, mole fraction, percentage (by volume and mass both), definitions of
dilute solutions, vapour pressure of solutions and Raoult’s Law, Colligative
properties, lowering of vapour pressure, depression of freezing point,
elevation of boiling points and osmotic pressure, determination of molecular
masses using colligative properties, abnormal values of molecular masses, van’t
Hoff factor. simple numerical problems.
12. Chemical kinetics
Rate of chemical reactions, factors, affecting rates of reactions –concentration,
temperature and catalyst, order and molecularity of reactions, rate law and
rate constant, differential and integral forms of first order reaction,
half-life (only zero and first order) characteristics of first order reaction,
effect of temperature on reactions, Arrhenius theory - activation energy,
collision theory of reaction rate (no derivation).
13. Electrochemistry
Conductance in electrolytic solutions, specific and molar conductivity,
variation of conductivity with concentration, Kohlrausch’s law, electrolysis
and laws of electrolysis (elementary idea), electrolytic and galvanic cells,
emf. of a cell, standard electrode potential, Nernst equation, concentration
cell, fuel cells, cell potential and Gibbs energy, dry cell and lead
accumulator.
14. Surface chemistry
Adsorption - physisorption and chemisorption, factors affecting
adsorption of gases on solids, catalysis, homogeneous and heterogeneous
activity and selectivity, enzyme catalysis, colloidal state, distinction
between true solutions, colloids and suspensions; lyophillic, lyophobic,
multimolecular and macromolecular colloids, properties of colloids, Tyndal
effect, Brownian movement, electrophoresis, coagulation, emulsions - type of
emulsions.
15. Hydrogen
Position of hydrogen in periodic table, isotopes of hydrogen, heavy
water, hydrogen peroxide-preparation, reactions and structures; hydrides and
their classification.
s-Block Elements (Alkali and Alkaline Earth metals):
Group 1 and Group 2 elements
Electronic configurations and general trends in physical and chemical
properties, anomalous properties of the first element of each group, diagonal
relationship.
Preparation and properties of some important compounds, sodium carbonate,
sodium hydroxide, sodium hydrogen carbonate and industrial uses of lime and
limestone, biological significance of Na, K, Mg and Ca.
17. General principles and processes of
isolation of elements
Principles and methods of extraction - concentration, reduction,
(chemical and electrolytic methods), and refining.
Occurrence and principles of extraction of Al, Cu, Zn and Fe.
18. p-Block Elements
Introduction to p-block elements
Electronic configurations and general trends in properties, viz. atomic sizes,
ionization enthalpies, electronegativity values, electron gain enthalpies and
oxidation states across the periods and down the groups in the p-block.
Unique behaviour of the top element in each group of the block - the covalency
limit and the pp - pp overlap in some molecules (e.g. N2, O2) and its
consequences; general trend in catenation tendency down each group.
Group-wise study of the p-block Elements
Group 13 - In addition to the general characteristics as outlined above,
properties and uses of aluminium, nature of hydrides/ halides and oxides;
Properties, structures and uses of diborane boron halides, aluminium chloride,
borax, boric acid and alums.
Group 14 - In addition to the general characteristics; carbon – catenation,
allotropic forms (diamond and graphite), properties and structures of oxides;
silicon - silicon tetrachloride, and structures and uses of silicates,
silicones and zeolites.
Group 15 - In addition to the general characteristics, the general trends in
the nature and structures of hydrides, halides and oxides of these elements.
Preparation and properties of ammonia, nitric acid, phosphine and halides of
phosphorus, structures of the oxoacids of phosphorus.
Group 16 - In addition to the general characteristics, preparations,
properties and uses of dioxygen, simple oxides, ozone; sulphur - allotropic
forms, compounds of sulphur, preparation, properties and uses of sulphur
dioxide and sulphuric acid, industrial preparations of sulphuric acid,
structures of oxoacids of sulphur.
Group 17 - In addition to the general characteristics, occurrence, trends in
physical and chemical properties, oxides and oxoacids of halogens (structures
only), preparation, properties and uses of chlorine and hydrochloric acid,
trends in the acidic nature of hydrogen halides. Interhalogen compounds
(structures only).
Group 18 - General introduction, electronic configurations, occurrence, trends
in physical and chemical properties and uses, - fluorides and oxides of xenon
(structures only).
19.The d-and f-Block elements
General introduction, electronic configuration, occurrence and
characteristics of transition metals, general trends in properties of the
first row transition metals –physical properties, ionization enthalpy,
oxidation states, ionic radii, colour, catalytic property, magnetic property,
interstitial compounds, alloy formation; preparations and properties of
K2Cr2O7 and KMnO4.
Lanthanoids - Electronic configuration and oxidation states, chemical
reactivity and lanthanoid contraction.
Actinoids - Electronic configuration and oxidation states.
20. Coordination compounds
Introduction to ligands, coordination number, colour, magnetic
properties, and shapes; IUPAC - nomenclature of mononuclear coordination
compounds, isomerism , bonding-valence bond approach to the bonding and basic
ideas of Crystal Field Theory, colour and magnetic properties. Elementary
ideas of metal - carbon bonds and organometallic compounds, importance of
co-ordination compounds (in qualitative analysis, extraction of metals and
biological systems).
21. Some basic principles of Organic
Chemistry
- Tetravalence of carbon, hybridization ( s and p ), shapes of simple
molecules, functional groups:-C=C-, -C C- and those containing halogens,
oxygen, nitrogen and sulphur; homologous series, isomerism.
General introduction to naming organic compounds-trivial names and IUPAC
nomenclature.
Electronic displacement in a covalent bond; inductive effect, electromeric
effect, resonance and hyperconjugation. Fission of covalent bond: free
radicals, electrophiles and nucleophiles, carbocations and carbonanions.
Common types of organic reactions: substitution, addition, elimination and
rearrangement reactions.
22. Hydrocarbons
Alkanes and cycloalkanes : classification of hydrocarbons, alkanes and
cycloalkanes, nomenclature and conformations of alkanes and cycloalkanes.
Alkenes and alkynes : Nomenclature and isomerism, general methods of
preparation, properties (physical and chemical), mechanism of electrophilic
addition, Markownikoff’s rule, peroxide effect, acidic character of alkynes,
polymerisation reactions.
Aromatic hydrocarbons: Benzene and its homologues, nomenclature, sources of
aromatic hydrocarbons (coal and petroleum), structure of benzene, chemical
reaction of benzene-mechanism of electrophilic substitution. Directive
influence of substituents and their effect on reactivity.
Petroleum and petrochemicals : Composition of crude oil fractionation and
uses, quality of gasoline, LPG, CNG, cracking and reforming, petrochemicals.
23. Purification and characterization of
carbon compounds
Purification of carbon compounds : filtration, crystallisation,
sublimation, distillation chromatography,
Qualitative analysis : detection of nitrogen, sulphur, phosphorus and
halogens.
Quantitative analysis : estimation of different elements (H, N, halogens, S
and P)
Determination of molecular masses : Silver salt method, chloroplatinate salt
method, calculations of empirical and molecular formulas.
24. Organic compounds with functional groups
containing halogens (X)
Nature of C-X bond in haloalkanes and haloarenes, nomenclature,
physical and chemical properties, mechanism of substitution reactions,
reactivity of C-X bond in haloalkanes and haloarenes.
Some commercially important compounds : dichloro, trichloro and
tetrachloromethanes; p-dichlorobenzene, freons, BHC, DDT, their uses and
important reactions.
Organic compounds with functional groups containing oxygen
Alcohols and phenols : Nomenclature, methods of preparation, physical and
chemical properties; chemical reactivity of phenols in electrophilic
substitutions, acidic nature of phenol, ethers: electronic structure,
structure of functional group, nomenclature, important methods of preparation,
physical and chemical properties, some commercially important compounds.
Aldehydes and ketones : Electronic structure of carbonyl group, nomenclature,
important methods of preparation, physical properties and chemical reactions,
relative reactivity of aldehydic and ketonic groups, acidity of a-hydrogen,
aldol condensation. Connizzarro reaction, nucleophilic addition reaction to
>C=O groups.
Carboxylic acids : Electronic structure of-COOH, Nomenclature, important
methods of preparation, physical properties and effect of substituents on
a-carbon on acid strength, chemical reactions.
Derivatives of carboxylic acids : Electronic structure of acid chloride, acid
anhydride, ester and amide groups, nomenclature, important methods of
preparation, comparative reactivity of acid derivatives. Some commercially
important compounds.
26. Organic Compounds with functional group containing
nitrogen
- Structure, nomenclature of nitro, amino, cyano and diazo compounds.
- Nitro compounds – important methods of preparation, physical properties
and chemical reactions.
- Amines : primary, secondary and tertiary amines, a general awareness,
important methods of preparation, physical properties, basic character of
amines, chemical reactions.
- Cyanides and isocyanides : preparation, physical properties and chemical
reactions.
- Diazonium salts : Preparation, chemical reaction and uses of benzene
diazonium chloride. Some commercially important nitrogen containg carbon
compounds, (aniline, TNT)
27. Polymers
Classification of polymers, general methods of polymerization-addition and
condensation: addition-free radical, cationic, anionic polymerization,
copolymerisation, natural rubber, vulcanization of rubber, synthetic rubbers,
condensation polymers, idea of macromolecules, biodegradable polymers.
Some commercially important polymers (PVC, teflon, polystyrene, nylon-6 and
66, terylene and bakelite).
28. Environmental Chemistry
Environmental pollution – air, water and soil pollutions, chemical
reactions in atmosphere, smogs, major atmospheric pollutants, acid-rain, ozone
and its reactions, effects of depletion of ozone layer, green house effect and
global warming – pollution due to industrial wastes, green chemistry as an
alternative tool for reducing pollution, strategy for controlling
environmental pollution.
29.Biomolecules
Carbohydrates : Classification, aldose and ketose, monosaccharides
(glucose and fructose), oligosaccharides (sucrose, lactose, maltose),
polysaccharides (starch, cellulose, glycogen); important simple chemical
reactions of glucose, elementary idea of structure of pentose and hexose.
Proteins : Elementary idea of a-amino acids, peptide bond, polypeptides,
proteins; primary, secondary and tertiary structure of proteins and quaternary
structure (gualitative idea only), denaturation of proteins, enzymes.
Vitamins : Classification and functions
Nucleic acids : Chemical composition of DNA and RNA
Lipids : Classification and structure
Hormones : Classification and functions in biosystem.
30. Chemistry in everyday life
- Chemicals in medicines – analgesics, tranquilizers, antiseptics,
disinfectants, antimicrobials, antifertility drugs, antacids, antihistamins.
- Chemicals in food – preservativess, artificial sweetening agents.
- Cleansing agents – soaps and detergents, cleansing action.
- Rocket propellants : characteristics and chemicals used.
Courtesy : http://www.cbse.nic.in